Hi! This time I'll show you my home Lab which is where I usually tear things apart and sometimes make some electronic or electromechanical devices. So, my lab is composed by two workbenches: one for computer programming and electronics and another one for the hard work (cutting, drilling, hammering, etc.).
|(Click the photo for better resolution in Picasa Photostream)|
In the first workbench I have an old computer for computer programming and CNC machine control, a 12V/2A cheap power supply, a cheap multimeter, and an ERSA RDS80 soldering station with digital temperature control, which I strongly recommend if you're willing to spend some money on soldering equipment (if you just want to buy a soldering iron I recommend you to buy one from ERSA or JBC). Besides this basic tools I also have a precision screwdriver set and lots and lots of mini shelves that I bought in some chinese shop to store all the components.
In the second workbench I have a drill press, electric screwdriver, a Dremel, drill bits, jigsaw, handsaw, and some other basic tools that any electronics hobbyist requires. In one of the shelves I store the few chemicals I sometimes use (acetone for glueing plexiglass, Chloridric acid for PCB etching, etc.) and some spray paint. Next to this workbench I have a box where I store some materials like aluminium, plexiglass, plastic, etc.
Get the flash player here: http://www.adobe.com/flashplayer
Besides this two workbenches I have a mobile mini desk with my homemade CNC machine and controller. I called it The Maker1. I use it for precision cutting and to make some computer-designed pieces. It has a work area of approximately 250x250mm. In the future I want to try to make PCBs with it too. Someday I'll make a post about the construction of the machine and the software toolchain I use to design the pieces and to operate the machine (by the way, The Maker2 is currently in slow development).
I hope you like the pics and if you have an home Lab, feel free to share it in the comments ;)
Update (10/01/12): The post about the software toolchain that I use to design the parts and operate the CNC is available here.
Did you find this post helpful? Do you wish to contribute to other projects regarding computer science, electronics, robotics or mechatronics that will be posted in this blog? If you wish to do so, you can donate via paypal using the button below. Thanks! :)